Getting the best from your BMS

Published:  06 February, 2014

More premises of all sizes are turning to bureau services as a cost effective way of leveraging maximum gain from their BMS installations, says Marc Harrison of BG Energy Solutions.

Reducing energy use makes perfect business sense; it saves money, enhances corporate reputation and helps everyone in the fight against climate change. With this in mind, building management systems (BMS) have long been hailed as an optimum way to cut energy consumption and maintenance costs. According to the Carbon Trust, in premises with well-controlled systems, heating bills can be up to 35% lower than in poorly controlled buildings.

A BMS has many functions, controlling services such as heating, hot water, ventilation, cooling, shading, air conditioning and lighting. However, even in premises with the latest BMS, there is widespread failure to get the most from the technology. Many systems are now so sophisticated and complex that customers are missing out on many potential benefits. Or, in cases where key people have left, new employees are often unaware of where the hardware is located, how the controls are set and when/how often they are checked. For these reasons there is a growing trend towards the use of BMS bureau services.

When installed correctly and when working properly, building controls have a range of benefits.

• Minimise running costs, energy consumption and pollution associated with energy use.

• Improve comfort for building users.

• Prevent the unwanted or out-of-hours operation of equipment.

• Limit excessive wear and tear on building systems and plant.

• Minimise maintenance, repair and replacement costs.

Outside expertise can be the key to maximising previously unrealised energy and maintenance savings from a BMS. Importantly, this is not just about having a service contract and receiving routine maintenance, it’s about sharing knowledge (typically through training days) and helping bureau users better understand their BMS, particularly regarding usage and maintenance.

BG Energy Solutions has over a hundred UK sites using its bureau services. Client BMS systems are monitored remotely 364 days a year, with 99% of issues resolved over the telephone or Internet. Each remote bureau subscription and service contract can be tailored according to requirements. As well as telephone/IP support, plans can include a range of other services.

• Engineer call-outs.

• pre-planned maintenance dates with diagnosis of potential failure points.

• Preferential hourly rates.

BMS, BEMS, Controls, BG Energy Solutions
The bureau services provided by BG Energy Solutions plays a key role in the operation of Adams Foods at Leek in Staffordshire.

• Discounted spare parts.

• Proactive visits to identify potential energy savings and advantageous upgrades.

‘Our plan embraces an emergency call-out service that spans 364 days a year and a service maintenance contract covering 16 annual visits,’ explains Keith Wilson, facilities manager at Leek-based Adams Foods, one of the UK’s largest suppliers of pre-packed hard cheese and a user of our bureau services. ‘The latter equates to one visit every month, leaving four “spare” days which can be allocated to fit our project requirements as they change throughout the year.’

Fault management is another area offering benefits to bureau users. A reputable bureau service will be able to collate data and relay any issues to the site facilities team and mechanical contractors accordingly. Similarly, regarding maintenance, a bureau service can be of enormous assistance to on-site engineers. A case in point is where heating or cooling valve actuators fail to operate in accordance with BMS instructions. Stuck valves can be problematic, as just 1 K out-of-synch with the BMS can result in 10% excess energy use.

Other common fault situations involve engineers manually over-riding switches to turn on heaters, for example. These are easily forgotten and are frequently left on for extended periods. A bureau can set up alarms to monitor and address such situations.

At Adams Foods, the emphasis is very much on temperature control, particularly in the warehouse where millions of pounds worth of cheese is stored. Both the high-care and low-care areas of the company’s £30 million Leek factory are also subject to issues if the temperature fluctuates beyond its designated limits.

‘There is a safety aspect where temperature becomes a risk factor,’ says Mr Wilson. ‘For this reason, the ongoing attention of BG Energy is a vital part of our ongoing production and business operation.’

Regarding energy use, if supplied with two years of energy data, BG Energy Solutions will happily produce a free-of-charge energy-reduction survey, identifying various proposals to make savings. At Adams Foods, BG Energy installed energy metering, monitoring and targeting technology on the company’s Trend BMS in the form of target-and-monitoring software.

The target-and-monitoring software illustrates energy consumption data in real time and demonstrates wastage that would be otherwise impossible to see. It establishes baselines and targets, and aids in forecasting future energy budgets. The software also monitors carbon emissions, which is important because Adams Foods can claim a Government rebate against any reductions. However, all the figures declared in order to claim the rebate must be verified — which is where the target-and-monitoring software comes in.

‘We’ve used BG Energy’s bureau services for some years now,’ concludes Mr Wilson. ‘Yes, their costs are very competitive, but mainly we retain them because of their systems knowledge and experience. They’ve become part of the business fabric here.’

Using a bureau overwhelmingly pays for itself. Problems can be remedied swiftly and issues identified before they become failures. Over 90% of those using a bureau service for the first time renew year-on-year — a statistic that speaks for itself.

Marc Harrison is bureau manager at BG Energy Solutions.



comments powered by Disqus

Search

Welcome

Welcome to Modern Building Services Online, the web edition of Modern Building Services (MBS) journal and the UK's most popular Building Services engineering site. Modern Building Services covers the entire Building Services Engineering industry. This site contains archived content from the journal, plus web-specific content.

When you go to our digital edition, you can also access the archive of digital editions.
December 2018: DIGITAL EDITION

ARCHIVE OF DIGITAL EDITIONS

Modern Building services has a group
on Linkedin - join us!

Jobs

  • Senior Building Services Engineer

      Invitations are invited from experienced Building Services Engineers to assist in the development of a new division within an established professional practice. The projects will be predominantly with Defence-related and Government establishments but w......

  • Building Energy Management Systems (BEMS) Engineer

      Consistently rated amongst the world's best universities, Imperial College London is a science-based institution with a reputation for excellence in teaching and research. Imperial has one of the largest and most diverse university estate portfolios in......

  • Engineering Technical Assistant

      Consistently rated amongst the world's best universities, Imperial College London is a science-based institution with a reputation for excellence in teaching and research. Imperial has one of the largest and most diverse university estate portfolios in......

more jobs »

Poll

"Is the Building Services industry lagging behind in the implementation of BIM?"