Big changes ahead for UK energy market

Published:  02 November, 2016

BMS, BEMS, building management system, controls, BCIA, Building Controls Industry Association, grid, demand management
Responding to a less-predictable energy supply — Malcolm Anson.

Malcolm Anson looks at evidence that the energy market in the UK is experiencing some big changes — and explains why this is important for the controls sector.

In August this year, National Grid did something unexpected. It cut its forecasts for the number of new UK power plants that will come online in the next five years. In 2012, National Grid predicted that by 2021 there would be 33 GW of new power plant capacity connected to the network. This year, that forecast dropped to just 14 GW.

At the same time as predicted capacity fell, it was also made clear that renewables are having more impact on the energy supply than they were expected to by this point in time. Solar farms and small-scale generators, including building integrated solar panels, are now supplying 11 GW of electricity, with 13 GW more to come online between now and 2021.

In 2012, National Grid predicted the figure in 2021 would be nearer 0.5 GW of renewable generation — which shows how surprising the real numbers are.

The impact of roof-mounted renewables has probably taken a lot of people by surprise. There are certainly benefits to the environment of this shift away from fossil-fuel based electricity, but our rapidly evolving power network also offers its own challenges.

The most obvious of these is the ongoing problem of balancing supply with demand. Only recently, National Grid chief executive Nicola Shaw was on Radio 4’s news programme reassuring us all that the lights won’t go off as we drop coal-fired power stations from our energy sources. It is probably not the last time that she’ll have to make such assurances, because one of the challenges with renewable sources such as wind, for example, is that the supply of energy can be less predictable than that from coal- or oil-fired power stations.

There is a number of options that National Grid is taking to deal with the changing electricity supply issue in the UK. The energy-storage technology sector, for example, is developing rapidly. But the approach that should interest the controls sector and its customers most is the proposal by National Grid to increase use of demand-side response technologies. It has committed to significantly increased use of demand flexibility by 2030.

The controls sector saw this situation in the 1970s, though at that time it was known as ‘load shedding’. For industrial and commercial energy users, demand response means changing demand for power from equipment for heating, ventilation and air conditioning, for example. Powering down can be carried out in a way that is undetectable to occupants — or it can mean a switch to using off-grid energy sources.

BCIA, BEMS, BMS, Building Controls Industry Association, building management system, Controls, demand management, grid
The role of BEMS in balancing the National Grid.

All of these developments are significant because a less-predictable energy supply and greater emphasis on managing demand are the background against which controls and building energy management systems (BEMS) will have to keep buildings in balance in the coming years.

Building owners and energy managers are also facing more unpredictability in their electricity prices. Greater emphasis on renewable energy sources, for example, will undoubtedly have an impact on what are considered 'peak' electricity usage times. If we are relying on solar energy, will night-time energy prices still be the lowest?

The ability to reduce business energy costs simply by negotiating with suppliers will also be reduced. National Grid is gradually moving all businesses to half-hourly smart meters over the next few years, exposing more organisations to the price increases inherent in the TUOS and TRIAD peak-time pricing schemes. And these times themselves will become less predictable in the future, as they’re also being affected by changes in the UK weather.

Good building controls will be vital to ensure that building owners know as much as possible about their properties’ patterns of energy use. They will need to know when there is ‘spare’ capacity to switch away from National Grid supplies. They will also need to be able to respond to changes in energy costs throughout the day, and shift their energy usage to new patterns. Data from the BEMS will provide insight with actionable cost savings.

This is a time when BCIA members can show the benefits of our technologies and know-how. In March 2016, the National Infrastructure Commission (NIC) produced a report on how the UK can better balance its supply and demand for energy. The report stated: ‘There is an opportunity here for UK firms. We are a world leader in data analytics and software development that can be used to manager energy demand seamlessly.’

There’s no doubt that moving to a greener and wider range of energy sources is better for the UK environment and economy. But we all need to be ready for these changes, because it won’t be business as usual, and the unprepared could be caught out by unexpected and significant increases in energy costs.

Malcolm Anson is president of the Building Controls Industry Association, and managing director of Clarkson Controls.

comments powered by Disqus



Welcome to Modern Building Services Online, the web edition of Modern Building Services (MBS) journal and the UK's most popular Building Services engineering site. Modern Building Services covers the entire Building Services Engineering industry. This site contains archived content from the journal, plus web-specific content.

When you go to our digital edition, you can also access the archive of digital editions.
November 2017: DIGITAL EDITION

Modern Building services has a group
on Linkedin - join us!



  • Intermediate / Senior Mechanical Engineer

    The Mechanical team undertake the design and specification of a range of Mechanical building services in a lead or supporting role, depending on project complexity and scale. You should demonstrate a flexible approach to design and team working and wil......

  • Senior Urban Designer

     Applicants will be Master’s Degree qualified Architects / Urban Designers, with a strong portfolio of work highlighting a variety of projects at a range of scales and types, with strong focus on regeneration, infrastructure-led projects and major develo......

  • Principal Structural Engineer

    We are currently recruiting on behalf of a global client, with a diverse range of award winning projects to their name. Their experience spans a host of market sectors, including transport, infrastructure, defence, scientific, education, high-tech and ......

more jobs »


"Is the Building Services industry lagging behind in the implementation of BIM?"